Workshop
Series
­
sq10

Instax Square 10

Php ~

ACCESSORIES

Untitled-2

FEATURES

Untitled-1

SPECIFICATIONS

CAMERA
Image sensor 1/4-in., CMOS with primary color filter
Effective pixels 1920 x 1920
Storage media Built-in memory, microSD / microSDHC memory card
Recording capacity Built-in memory: Approx. 50 files
microSD / microSDHC memory card: Approx. 1000 files per 1 gigabyte
File system Compliant with Design Rule for Camera File System (DCF), Exif Ver.2.3, Compliant with JPEG and PIM
Focal length Fixed as 28.5 mm (35-mm format equivalent)
Aperture F2.4
Auto focus system Single AF (Contrast-detect TTL, equipped with AF illuminator)
Focus range 10cm to ∞
Shutter speed 1/29500 sec. to 1/2 sec. (Auto), maximum 10 sec. in Bulb mode
Sensitivity ISO 100 to 1600 (Auto)
Exposure control Programmed AE
Metering 256-segment through the lens (TTL) metering, Multi metering
White balance Auto
Flash Auto / Compulsory flash / Suppressed flash / Slow synchro / Red-eye removal Eff ective range: Approx. 50 cm to 8 m
Shooting mode Standard, Double exposure, Bulb mode
Self-timer Approx. 10 sec. / Approx. 2 sec.
Image effect 10 Filters, Brightness adjustment (19 steps), Vignette (19 steps)
Playback function Trimming, Multi image playback
PRINTER
Film FUJIFILM Instant Film “instax SQUARE” (Purchased separately)
Photo capacity 10 prints/pack
Film size 86 mm × 72 mm
Image size 62 mm × 62 mm
Supported image size 800 × 800 dots
Printing solution 12.5 dots/mm (318 dpi, 80 µm dot pitch)
Printing levels 256 levels per color (RGB)
Supported image format JPEG (Some images saved with a photo editing / processing software may not be displayed or printed.)
Printing time Approx. 12 seconds
Print timing Printing shortly after shooting / Printing after selecting image
Printing function Images on built-in memory / microSD / microSDHC card
Reprint Printable up to the past 50 prints
(Up to 50 images stored in print history)
Digital zoom Up to 2.4 X in printing (Output pixels: 800 × 800)
Film detection Yes (Automatic ejection when inserted)
OTHERS
LCD monitor 3.0-in. (7.6 cm) TFT color LCD monitor
Pixels: Approx. 460k-dots
Input / Output terminals Micro USB (For charging only)
Battery NP-50
Charging function Built-in
Printing capacity Approx. 160 prints (From when the battery is charged fully)
* Varies depending on the conditions of use.
Charging time Approx. 3 to 4 hours (Using 0.5 A USB port)
* Varies depending on air temperature.
Dimension 119 mm × 47 mm × 127 mm (W × D × H)
Weight 450 g (includes film pack and battery)

* Specifications above are subject to change for improvement.

Share on FacebookTweet about this on TwitterPin on Pinterest

Subscribe to Instax Newsletter

Dealer locator